内窥镜设备如今是医学行业使用很频繁的一种医用设备，其性能优势明显且有效果，当然在使用期间也会有各类问题出现，比如说附件插入问题，那么要如何处理呢？

　　Endoscope equipment is now a medical device that is frequently used in the medical industry. Its performance advantages are obvious and effective. Of course, there will be various problems during the use, such as attachment insertion problem.

　　内窥镜设备打弯的角度太大→附件的柔软性被其先端硬质部分所限制→产生附件插入的问题。内窥镜设备被折→导致钳子管道变形→产生附件插入的问题。不正确的清洗程序→脏物凝固和结晶形成在管道里→产生附件插入的问题。使用损坏的附件→附件在管道里打结→产生附件插入的问题。

　　The Angle of the endoscope equipment is too large → the softness of the treatment accessory is limited by the hard part of its apex → the attachment insertion problem is caused. The endoscope equipment was folded, leading to the deformation of the clamp pipe, and causing problems of attachment insertion. Improper cleaning and disinfection procedures → dirt solidifies and crystals form in pipes → problems with attachment insertion occur. Use damaged accessories → accessories knotted in pipes → problems with attachment insertion.

　　在内窥镜设备出现的很多故障中，除了探头本身的自然损耗须更换新探头之外，探头的使用环境以及人为等因素引起的故障都是可以通过预防性维护保养来避免。怎样能避免附件插入的问题？须正确地清洗内窥镜设备。使用前应认真检查附件。插入附件时要小心。良好的操作习惯。

　　In many failures of endoscope equipment, in addition to the natural loss of the probe itself to replace the new probe, the use of the probe environment and man-made factors caused by the failure can be avoided through preventive maintenance. How can attachment insertion problems be avoided? Endoscope equipment must be properly cleaned and disinfected. Check the attachment carefully before use. Be careful when inserting attachments. Good operation habits.

　　内窥镜设备维修人员认为，如果发生故障了，可以通过询问仪器操作人员(或其他维修人员)了解故障发生前和发生时的情况，如电压是否正常，是否有异常气味或异常声音，故障是突然发生还是逐步形成的，故障是否时有时无，设备的使用年限和故障发生时的使用环境，代换过哪些元件或调动过哪些地方等。

　　Endoscopic equipment maintenance personnel believe that if the failure happens, can by asking the instrument operators (or other maintenance personnel) understand the failure before and at the time of the situation, such as the voltage is normal, whether there are abnormal smell or abnormal sound fault is a sudden or gradually formed, whether the fault, the service life of equipment and fault occurs in the use of the environment, What components have been replaced or what places have been transferred.

　　很多时候内窥镜设备损坏一般而言均是人为的使用与其他硬物碰撞后导致，此外自身磨损或老化造成电路板烧坏的原因是开关机不正常导致。所以说，使用中造成损坏的可能性非常的大，又因为内窥镜设备比较贵，因此要重视预防性维护保养，预防性维护保养是一项经常性细致的工作，做得好做得认真做得严格可以减少很多故障的发生。

　　Most of the time, the damage of endoscope equipment is generally caused by the use of artificial collision with other hard objects, in addition to their own wear or aging caused by the circuit board burned out is caused by abnormal switching machine. Therefore, the possibility of damage in use is very large, and because the price of endoscope equipment is relatively expensive, so we should pay attention to preventive maintenance, preventive maintenance is a regular careful work, do well do seriously do strictly can reduce the occurrence of a lot of failures.

　　内窥镜设备附件插入的问题如何处理？以上便是问题的讲解内容了，所以说您在使用内窥镜设备工作之前建议是做好检查工作。更多内容就来网站www.jiangrenyiliao.cn进行咨询吧。

　　How to deal with the problem of endoscope equipment attachment insertion? The above is the problem explained content, so you use endoscope equipment before the recommendation is to do a good job of inspection. For more information, please visit www.jiangrenyiliao.cn.