我们必须知道的是，工业内窥镜的结构当中，有一个部分是非常容易出现损耗的，便是在镜面上面。因此，我们在平时使用的过程中，除了要及时清洗以外，更重要的是不要用尖锐的物质在它的表面上划动，一旦遭受了，这个划痕是非常明显的，如果力量比较大的话，出现碎裂的情况也是会有的，所以我们肯定是在这个方面要特别注意。
First of all, we must know that one part of the structure of industrial endoscope is very prone to loss, that is, on the mirror. Therefore, in the process of normal use, in addition to timely cleaning, it is more important not to scratch its surface with sharp substances. Once it is suffered, the scratch is very obvious. If the force is relatively large, there will be fragmentation, so we must pay special attention to this aspect.
在探测不同的物质之前，因为它们在外观上以及内部构造上面都是有很大的区别，那么我们在转换的时候，肯定是需要注意调整。
Before detecting different substances, because they are very different in appearance and internal structure, we must pay attention to adjustment during conversion.
不管是在置放还是拿取的过程当中，都应该轻拿轻放内窥镜。
The endoscope should be handled with care whether it is placed or taken.
正确的方法就是相关人员手持物镜的部位，这样可以帮助镜子防止出现意外落地、弯曲等情况产生。
The correct method is to hold the part of the objective lens by relevant personnel, which can help the mirror prevent accidental landing, bending, etc.

在使用工业内窥镜完毕之后，应该先用干净柔软的布料清洁一下工业内窥镜相关的线路，然后再重新绑定在绕线轮上。
After using the industrial endoscope, clean the circuit related to the industrial endoscope with a clean and soft cloth, and then rebind it on the winding wheel.
对于各种检测工程当中出现的阻碍物，都不能硬拉扯内窥镜。而是应该选择巧妙的方法进行延伸，从而保证工业内窥镜不会受到损坏。
For obstacles in various testing projects, the endoscope shall not be pulled. Instead, ingenious methods should be selected for extension, so as to ensure that the industrial endoscope will not be damaged.
对于工业内窥镜的清洁以及保养，应该采取定期检查和维护保养。
For the cleaning and maintenance of industrial endoscope, regular inspection and maintenance should be taken.
这样不仅能够及时发现该产品的故障以及其他问题存在，也能让有效的保养维护措施，帮助产品延长使用时间。
In this way, not only the faults and other problems of the product can be found in time, but also effective maintenance measures can be taken to help the product prolong its service time.
这样不仅可以让产品的使用时间更加长久，也能让各位使用者在后期工作过程当中，使用起来得心应手，不会存在各种故障问题。
This can not only make the use time of the product longer, but also enable users to use it easily in the later work process without various fault problems.