In recent years, industrial endoscopy detection has entered a mature stage, more and more used in the quality control of product production process, and developed into a conventional detection method. So how can we better maintain the endoscope in more and more detection work?
1. Handle the industrial endoscope with care to prevent the mirror from bending and falling to the ground.
2. There are also places for taking pictures and taking pictures. Under some special circumstances, the probe should be covered with a layer of things to protect it, so as to avoid the big friction of the probe and make it into an unclear picture.
3. After the operation, we should clean the wire of the winding wheel with cloth, and then bind it again and put it in the specified cabinet. Before storing the cabinet, carefully observe the clarity of the mirror to ensure the next use.
4. In the process of detection, when there are obstacles to the crawler, we should not pull it hard. We should try to use skillful force to further extend it, and we should not bend the line. It is not conducive to internal to external transmission.
5. For the electronic industrial endoscope, the battery should be removed immediately after it is used up, and the battery should be charged in time after it is used up. I hope you can do well in the daily maintenance, so as to ensure the service life of the product, not to often have some small problems, so that you can easily use in your work.
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: endoscopic equipment maintenance http://www.jiangrenyiliao.cn .